Whether renovating your interior or a new construction, painting surfaces is a determining element of the atmosphere

Before painting a room

The result does not only depend on the quality of the work carried out, but also on the external and internal conditions. It would not be optimal to have to repaint the room, because the paint did not dry properly or because there was dust on your walls. Here’s everything you need to know before painting a room.

9 steps to follow to paint a room yourself

Step 1: Prepare the room

The first step is to prepare the room, so you need to take out small pieces of furniture like lamps and decorative accessories. Then place the large pieces of furniture in the center of the room to cover them with a canvas. Remove anything that should not be painted, such as electrical outlets. If you have light fixtures, just unscrew them and hang them down to cover them with plastic wrap. Lay a canvas on the floor to protect your floor from splashing. Now apply masking tape to the edges you want to protect and to the window frames. Using a utility knife, smooth the edge of the masking tape with a putty knife to prevent paint from seeping underneath.

Step 2: Prepare the walls

The second step is to prepare the walls. It is therefore necessary to fill the visible holes and cracks using a pore filler . When it is dry, just sand the walls and remove the dust from the floor with a vacuum cleaner. Do you have mold on your walls or on your ceiling and want to paint? In order to remove mold, you need a mixture of one part bleach to three parts water and rub the surface. Remember to protect your hands with gloves. To get best results, wash the walls and ceiling with a cloth using TSP ( trisodium phosphate ) to remove all dirt. Also clean the baseboards with a damp sponge or cotton cloth.

Step 3: Apply a primer

It may be helpful to apply a primer before painting a room. Simply apply the primer to the areas that have been repaired to verify that the stains are no longer visible. Then, generously apply a layer of this product over the entire surface to be painted and let dry. Sand the surface with 80 grit sandpaper and then with 220 grit sandpaper.

Step 4: Mix the paint

In order to have a uniform shade, mix the paint with a stick and then transfer it to a paint tray . Confused about what type of paint to use for your room? Visit the shopping guide on the different varieties of paint available on the market .

Step 5: Paint the corners and edges

With a 2-inch paintbrush ,Painter dubai start by painting the angles and edges along the wall. If the ceiling is a different color, draw a strip of a few inches of that color on the walls.

Step 6: Paint the ceiling

In order to achieve a flawless result, start with the ceiling. Cut first by drawing a thin line with your brush to cover the junction between the walls and the ceiling. This way cutting the walls will be easier. Then roll the first layer lengthwise or crosswise. For the second coat, roll in the other direction to remove any paint roller marks.

Step 7: Paint the moldings and frames

Even for moldings and framing, it is best to apply a primer. As soon as the primer is dry, you can sand the surface with 220 grit sandpaper to remove particles. Then clean the surfaces with a cloth. Using a brush, just paint the moldings and frames and when you’re done, gently peel off the masking tape.

Step 8: Paint the doors

First remove the handle, hinges and hinges from the door. Then place the door horizontally on easels. Sand the surface with 80 grit sandpaper and then with 220 grit sandpaper to apply a primer and wipe off dirt with a rag. As soon as the primer is dry, sand the surface with 220 grit sandpaper. You must first paint the edges, moldings, interior panels, rails, center posts and exterior studs. It is important to follow these steps for optimal results. If you have a smooth door, it is best to use a roller. In case your door has inserts and moldings, use a paintbrush.

Step 9: Paint the walls

Using an angled paintbrush, cut out the angles, framing and moldings. Quickly, wipe off any drops of paint that have fallen on the floor or on the moldings. Starting in the corner of the room, quickly cover cutout surfaces that have a different texture. Then roll up and down from left to right and form a wide “W”. In order to cover the surface, return to the area in the reverse movement. Repeating the same movement, work in 3 to 5 foot sections. It is best to cover the area completely before starting a new one. Again, don’t forget to remove the masking tapes before the paint dries.

About Post Author

admin

[email protected]

Happy

0 0 %

Sad

0 0 %

Excited

0 0 %

Sleepy

0 0 %

Angry

0 0 %

Surprise

0 0 %