A step-by-step guide to putting wallpaper in your house
1,294 Views
Wallpapering is making a comeback as a popular decorating choice. Your walls can become more uniquely you by using wallpaper. Some people prefer wallpaper, while others choose painting or tiling the walls. This space is filled with many colours, patterns, and textures. Use a bold or subtle wallpaper to make a statement in your space, like a music wallpaper if you are a music instruments fanatic.
The construction of this item can also be completed by a do-it-yourself. There is no need to consult an expert. The following guide will help you get it correctly the first time and correct any mistakes.
Prep your wall
Before even installing wallpaper, check that the wall’s surface has been thoroughly cleaned and prepared for the paper. Put yourself in a safer position by turning off the electricity. Remove the nails, screws, and hooks from the surface by taking them out with pliers or a screwdriver—splices in the tape.To avoid the risk of electrocution, the wallpaper glue needs to be activated with water. Taping outlets makes it easier to install paper by providing a frictionless surface accurately.
Take down the wallpaper in the walk. Remove the old wallpaper off the wall by scraping it off with a putty knife. If you are going to be wallpapering, make preparations ahead of time. Make use of wallpaper glue to remove the outdated wallpaper. A belt sander is an effective tool for removing stubborn wallpaper from older walls. After it has been removed from the building, the wall should be cleaned to remove any filth and mildew that may have accumulated. A solution of one gallon of bleach and one gallon of water can be helpful.
Measure your wall
Measure the length of your wall to determine how much wallpaper you need. Include an additional 20 cm to either the top or bottom measures. It attempts to hide its errors. Install a covering on the wall. Unroll it when you are ready to start cutting. Make a few shallow cuts in the first strip. Use a light pencil or make faint markings on the back of the wallpaper. Create a vertical line on the area that will be covered in paper. Make certain that the surface is even by using a pencil. This line will serve as a guide for the first strip.
Paste your paper on the wall
Use wall and paper paste. It’s difficult and messy. Transferring glued paper to a wall is tough. Attaching itself to everything causes shredding. Some wallpapers include paste, eliminating the need for wall glue. Follow the paste instructions properly. Carefully attach the first strip. Use a clean cloth or wallpaper brush to level it. Above and below, leave 2″ (the floor). Apply pressure and draw a line on the wall.
Marks simplify wallpaper cutting. Smooth out from the centre. Some first-time strips are better than others. Retry if it falls off. Never crease the paper. Pull it away from the wall to remove wrinkles. Progressively smooth out the wrinkled area. You can proceed to put the rest of the strips if the first one appears to fit in perfectly. Ensure that you meet up patterns as you place the next strips.
